Graco 25A693 Instructions Manual page 65

Table 4 4 4 Fields Fields on on the the Station Station Configuration
Table Table Fields on the Station
Field Field Field Description Description Description
Primary Tank Select Yes
Select No
Primary VFD Select the manufacturer of the Variable Frequency Drive/Inverter used to
control the agitator installed on the Primary Tank: Lenze
Variable Frequency Drive/Inverter (B) 17N041, 17N042, 17N043, page 16
Variable Frequency Drives/Inverters.
Select None
Primary Select the type of agitator installed on the Primary Tank:
Agitator
• 60 60 Hz 60
• 60 60 Hz 60
• 50 50 Hz 50
• 50 50 Hz 50
For part numbers, see
Select None
Secondary Select Yes
Tank
Select No
Secondary Select the manufacturer of the Variable Frequency Drive/Inverter used to control
VFD the agitator installed on the Secondary Tank: Lenze
Variable Frequency Drive/Inverter (B) 17N041, 17N042, 17N043, page 16
Variable Frequency Drives/Inverters.
Select None
Secondary Select the type of agitator installed on the Secondary Tank:
Agitator
60 Hz
• 60 60
60 Hz
• 60 60
50 Hz
• 50 50
50 Hz
• 50 50
For part numbers, see
Select None
Fill Pump Select Yes
the Secondary Tank.
Select No
Pump Type Select the type of pump used to circulate fluid through the station: None
E E E - - - Flo Flo DC
Flo
Tank Control Select Yes
Module
Select No
Back Pressure Select Yes
Regulator
Select No
(BPR)
3A4030C
Configuration Screen Screen
Configuration Screen
Yes if the station has a Primary Tank.
Yes
No if there is no Primary Tank installed.
No
None None if there is no Variable Frequency Drive/Inverter for the Primary Tank.
Hz Hz Direct Direct Drive Direct Drive Drive
Hz Back Hz Back Gear Back Gear Gear
Hz Direct Hz Direct Drive Direct Drive Drive
Hz Hz Back Back Gear Back Gear Gear
Appendix F: Agitator Part Numbers, page
None if no agitator is installed.
None
Yes if the station has a Secondary Tank. Yes
No if there is no Secondary Tank installed. No
None if there is no Variable Frequency Drive/Inverter for the Secondary Tank.
None
Hz Direct Direct Drive Drive
Hz Direct Drive
Hz Back Back Gear Gear
Hz Back Gear
Hz Direct Direct Drive Drive
Hz Direct Drive
Hz Back Back Gear Gear
Hz Back Gear
Appendix F: Agitator Part Numbers, page
None if no agitator is installed. None
Yes if a pneumatic remote transfer pump is used to fill the Primary Tank from
Yes
No if there is no transfer pump installed. No
DC x x x 2 2 2
DC
Yes if the Secondary Tank has a Tank Control Module. Yes
No if there is no Tank Control Module.
No
Yes if the station has an installed back pressure regulator. Yes
No if there is no back pressure regulator installed. No
Using the Setup Screens
Lenze or PowerFlex Lenze PowerFlex 4M PowerFlex
159.
Lenze or PowerFlex PowerFlex 4M 4M. See
Lenze PowerFlex 4M
159.
None, E E E - - - Flo None
4M. See 4M
for supported
for supported
Flo DC Flo DC, or DC
65