Graco 25A693 Instructions Manual page 103

You can perform any of the following tasks from the Stations screen:
Task
Task Task
Enable production on
a station
Disable a station
View the Station
Status screen for a
station
View the Pump Status
screen for a station
View the Primary Tank
Status screen for a
station
View the Secondary
Tank Status screen for
a station
View the Agitator
Status screen for a
station
3A4030C
Action
Action Action
Production column for the station, press Off
In the Production Production
turns green to indicate that the station is successfully enabled.
If the agitator idle time is set to 0, this feature is disabled.
When production is enabled, the system generates an event in the following cases:
• The pump transitions from the On
• The agitator transitions from the On
In the Production Production column for the station, press On Production
turns blue to indicate that the station is disabled.
Station button for the station. See
Press the Station Station
In the Pump Pump Pump column for the station, press the pump icon
Pump Status Screen, page
In the Primary Primary column for the station, press the tank icon Primary
Primary Tank Status Screen, page
In the Secondary Secondary column for the station, press the tank icon Secondary
Secondary Tank Status Screen, page
In an Agitator Agitator column for the station, press the agitator icon Agitator
Agitator Run Screen, page
Off. The button changes to On
Off
On to Off Off state.
On Off
On to Off Off state.
On Off
On. The button changes to Off On
Station Status Screen, page
107.
109.
111.
112.
Operation
On and
On
Off and Off
104.
. See
. See
. See
. See
103