Graco 25A693 Instructions Manual page 119

You can perform any of the following tasks from the Tanks screen:
Task
Task Task
Enable a station
Disable a station
View the Station
Status screen for a
station
You can view the following information for each tank or drum in the Intelligent Paint Kitchen system.
Item Description
Item Item Description Description
Primary Read-only. Indicates the current level (0–100%) of the Primary Tank in the selected
station.
Speed Read-only. Indicates the current speed of the agitator (if present) in the Primary Tank.
Each agitator's speed is displayed using the units (RPM, Hz, or %) specified during
setup. See
Secondary Read-only. Indicates the current level (0–100%) of the Secondary Tank in the selected
station.
Speed Read-only. Indicates the current speed of the agitator (if present) in the Secondary Tank.
3A4030C
Action
Action Action
Production column for the station, press Off
In the Production Production
turns green to indicate that the station is successfully enabled.
Production column for the station, press On
In the Production Production
turns blue to indicate that the station is disabled.
Station button for the station. See
Press a Station Station
Set Up Tank Control Modules, page
Off. The button changes to On
Off
On. The button changes to Off
On
Station Status Screen, page
71.
Operation
On and
On
Off and
Off
104.
119