Graco 25A693 Instructions Manual page 135

Intelligent paint kitchen system
Table of Contents

Advertisement

Use
Use an
Use
an SD
an
SD Card
SD
Card
Card
An SD flash card can be inserted into a slot on the
left side of the Touchscreen Module (14).
The SD card contains the Intelligent Paint Kitchen
software and the user-defined settings needed to run
the system. Use a 2GB SD card.
Use this procedure to insert, eject, or format an SD
card.
Figure 93 Insert an SD Card
Use
Use a a a USB
Use
USB Drive
USB
Drive
Drive
A USB drive can be inserted into the designated port
on the bottom of the Touchscreen Module (14).
A USB device is used to store the log files generated
by the Intelligent Paint Kitchen system. You can
Figure 94 USB Port on the Bottom of the
Touchscreen Module
1. Press
on any Run screen to enter the Setup
menu screen.
2. Press Utilities
Utilities
Utilities.
3. On The Utilities Menu screen, press USB
3A4030C
1. Press
menu screen.
2. Press Utilities
3. On the Utilities Menu screen, press SD
4. On the SD Card screen, press one of the
following buttons to perform a task with the SD
card:
Press Eject
Touchscreen Module. Physically remove the SD
card from its slot on the rear of the Touchscreen
Module.
Press Format
been inserted into the Touchscreen Module.
Press Mount
been inserted and formatted.
remove the USB device and use to copy log files onto
a computer. When you insert a correctly formatted
USB device into the computer, the log files start to
copy automatically.
4. On the USB screen, press one of the following
buttons to perform a task with the USB drive:
Press Eject
Touchscreen Module.
Press Format
been inserted into the Touchscreen Module.
USB.
USB
Press Firmware
update the firmware.
System Software Tasks
on any Run screen to enter the Setup
Utilities.
Utilities
Eject to eject the SD card from the
Eject
Format to format a new SD card that has
Format
Mount to begin using an SD card that has
Mount
Eject to eject the USB drive from the
Eject
Format to format a new USB drive that has
Format
Firmware Update
Update to use the USB drive to
Firmware
Update
SD Card
SD
Card.
Card
135

Advertisement

Table of Contents
loading

This manual is also suitable for:

25a84325a830

Table of Contents