Graco 25A693 Instructions Manual page 88

Using the Setup Screens
6. Repeat steps 3–6 for each additional station in
the system.
Table 13 13 Fields Fields on on the the Agitator
Table Table 13 Fields on the
Item Description
Item Item Description Description
Station Number The current station number being displayed:
• 1–Maximum number of stations
Station Name The alphanumeric name of the current station being displayed:
• 0–20 characters
Profile Number The current agitator profile number being displayed:
• 1–2
Profile Name The alphanumeric name of the agitator profile being displayed:
• 0–10 characters
NOTE: NOTE: NOTE: The system supports two profiles per agitator.
Minimum Speed Enter the minimum speed setpoint for the agitator at the minimum tank level.
• 0–100%
Minimum Level Enter the minimum tank level.
(L)
• 0–100%
Maximum
Enter the maximum speed set point for the agitator at the maximum tank level.
Speed
• 0–100%
Maximum Level Enter the maximum tank level.
(H)
• 0–100%
On Time Enter the On time when using agitator duty cycle. The agitator will cycle between the
specified On time and Off time.
• 0–59 minutes
Off Time Enter the Off time when using agitator duty cycle. The agitator will cycle between the
specified On time and Off time.
• 0–59 minutes
Lock Lock or or or Unlock Lock Unlock Setup Unlock Setup Screens Setup
At the bottom of each Run screen, an icon indicates
whether access to that screen is locked or unlocked.
If the screen is locked and you press an onscreen
control to enter or change settings, the Enter
Password screen appears. Enter the password to
continue. See Enter Password, page
88
Agitator Profiles Profiles Screen Screen
Agitator Profiles Screen
Screens Screens
95.
• Press to lock the screen.
• Press and enter the password to unlock the
screen.
3A4030C