Graco 25A693 Instructions Manual page 83

Configure Secondary Secondary Tank
Configure Configure Secondary
Figure 73 Secondary Tank Configuration Screen
1. Press on any Run screen to enter the Setup
menu screen.
Secondary Agitator Agitator.
2. Press Secondary Secondary Agitator
3. On the Primary Agitator screen, press the Station
Number Number Number field.
4. On the Station Station Number Station Number keypad, enter the number Number
of the station to be configured.
The number in the field is the station that is
being configured. The station name is displayed
directly below the Station Number.
3A4030C
Tank Volume Volume
Tank Volume
Station
Station
Using the Setup Screens
5. Press each item's data field and use the keypad
that displays to specify the equipment used in the
selected station. For a list of fields, see .
NOTE: For a newly-created station, all fields read
No No or None No None. None
6. Repeat steps 3–6 for each additional station in
the system.
83