Graco 25A693 Instructions Manual page 100

Operation
View View the View the Graphs the Graphs Screen Graphs Screen Screen
Use the graphs screen to display live or historical
data for a selected component in a station or
conditions in the station.
Use this procedure to first select the graph type, and
then to view that graph for any station in the system.
The graph displays up to 48 hours of data. To
obtain data up to the last seven days, use a USB to
download the data.
Button Description
Button Button Description Description
Flow Rate Displays data on the flow rate of fluid
through the pump in the selected
station.
Pump Speed Displays data on actual operating speed
of the pump in the selected station.
Transducer 1 Displays data obtained from pressure
sensor #1 on the pump, if the sensor is
installed.
Transducer 2 Displays data obtained from pressure
sensor #2 on the pump, if the sensor is
installed.
Pump Force Displays data on the pressure
generated by the pump in the selected
station.
Primary Tank Displays fluid level data for the Primary
Level Tank.
Primary Agitator Displays agitator speed for the agitator
installed in the Primary Tank.
Secondary Tank Displays fluid level data in the
Level Secondary Tank.
Secondary Displays agitator speed for the agitator
Agitator installed in the fluid supply.
100
1. Press on any Run screen.
2. Press a button on the Graph Menu screen to
select a graph for viewing.
Update Rate Rate
Update Update Rate
5 seconds
5 seconds
5 seconds
5 seconds
5 seconds
60 seconds
5 seconds
60 seconds
5 seconds
Units
Units Units
• Liters/min
• Gallons/min
• cc/min
• oz/min
• Cycles/min
Cycles per minute
• psi
• Bar
• MPa
• psi
• Bar
• MPa
Percent
Percent
• %
• Hz
• RPM
Percent
• %
• Hz
• RPM
3A4030C