Table of Contents
Advertisement
Operation
Ref.
Ref.
Ref.
Item
Item
Item
5
Status
6
Run/Stop Switch
7
Fill Pump Enable
8
Reed Switch Count Auxiliary function. Indicates the cycle count.
9
Active Profile
10
CPM
11
Pressure
12
Flow
13
% BPR
14
Profiles
15
Profile Select
108
Description
Description
Description
Indicates whether the pump is stopped, stalled, or running.
• Stopped
• Stalled
• Running
• Stopped — Deviation
• Stalled — Deviation
• Running — Deviation
• Stopped — Alarm
• Stopped — Advisory
• Stalled — Advisory
• Running — Advisory
Indicates whether the run/stop switch for the pump is on or off.
Indicates whether the remote transfer fill pump in this station is on
(pumping), or off (not pumping).
Displays the profile (if one is selected) that is currently specifying pump
performance.
Real time display of the pump operating speed in cycles per minute.
Real time display of the pump output pressure. Displayed in the units of
measure chosen when the pump was set up.
Press
to view or change the pump output pressure.
Real time display of the pump flow rate. Displayed in the units of
measure chosen when the pump was set up.
Real time display of the Back Pressure Regulator setting.
• 0% = Open
• 100% = Closed
Each column (#1–#4) displays the settings of a pump profile. When one
of these profiles is selected, the chosen column is highlighted in green.
Press one of the following to choose the profile and set operation
parameters for the pump:
Turn off the pump.
Turn off the pump.
Select Profile 1, if created.
Select Profile 2, if created.
Select Profile 3, if created.
Select Profile 4, if created.
3A4030C
Advertisement
Table of Contents
