Graco 25A693 Instructions Manual page 33

Connect Connect DC Connect DC Power DC Power Power to to to the
All electrical wiring must be done by a qualified
electrician and comply with all local codes and
regulations.
NOTICE
NOTICE NOTICE
If power and grounding connections are not done
properly, the equipment will be damaged and the
warranty voided.
Figure 30 Connect 24 VDC Power Supply to Fiber
Optic Converters
3A4030C
the Fiber the Fiber Optic Fiber Optic Converters Optic Converters Converters
Supervisor Box: Supervisor Supervisor Box: Each Supervisor Box (A) is Box:
shipped with one fiber optic converter installed and
connected to the 24 VDC power supply. If multiple
converters are installed in the box, connect them to
the Supervisor Box power supply as shown in the
following figure, Connect 24 VDC Power Supply to
Fiber Optic Converters. When installing wires, torque
terminals to 4.4 – 5.3 in-lb (0.5 – 0.6 N•m).
Expansion Boxes: Expansion Expansion Boxes: If used, Expansion Boxes are Boxes:
shipped with one fiber optic converters installed.
After installing more fiber optic converters if needed,
connect each one to the power supply.
Wire Wire Wire
Installation and Wiring
Color
Color Color
Red
Black
33