Graco 25A693 Instructions Manual page 84

Using the Setup Screens
Table 12 12 Fields Fields on on the the Secondary
Table Table 12 Fields on the
Item Item Item Description Description Description
Station Number The current station number being displayed:
• 1–Maximum number of stations
Station Name The alphanumeric name of the current station being displayed:
• 0–20 characters
Tank Type Select the secondary tank type:
Unknown (Default)
• Unknown Unknown
Cylinder
• Cylinder Cylinder
Volume Units Select the unit to display the secondary tank volume:
Gallons (Default)
• Gallons Gallons
Liters
• Liters Liters
Length Units Select the unit used to specify tank dimensions:
• in in in (Default)
cm
• cm cm
mm
• mm mm
Diameter (D) Enter the secondary tank diameter:
• 0.0–999.9
Full Height (F) Enter the fluid height from the bottom of the tank to the maximum level that will indicate
100% on the level sensor:
• 0.0–999.9
Empty Height
Enter the fluid height from the bottom of the tank to the minimum level that will indicate
(E) 0% on the level sensor:
• 0.0–999.9
84
Secondary Tank Tank Configuration Configuration Screen
Secondary Tank Configuration
Screen
Screen
3A4030C