Graco 25A693 Instructions Manual page 78

Using the Setup Screens
Table 9 9 9 Fields Fields on on the the Primary Primary Tank
Table Table Fields on the Primary
Item Item Item Description Description Description
Station Number The current station number being displayed:
• 1–Maximum number of stations
Station Name The alphanumeric name of the current station being displayed:
• 0–20 characters
Tank Type Select the primary tank type:
Unknown (Default)
• Unknown Unknown
Cylinder
• Cylinder Cylinder
Volume Units Select the unit to display the primary tank volume:
Gallons (Default)
• Gallons Gallons
Liters
• Liters Liters
Length Units Select the unit used to specify tank dimensions:
• in in in (Default)
cm
• cm cm
mm
• mm mm
Diameter (D) Enter the primary tank diameter:
• 0.0–999.9
Full Height (F) Enter the fluid height from the bottom of the tank to the maximum level that will indicate
100% on the level sensor:
• 0.0–999.9
Empty Height
Specify the fluid height from the bottom of the tank to the minimum level that will indicate
(E) 0% on the level sensor:
• 0.0–999.9
78
Tank Configuration Configuration Screen Screen
Tank Configuration Screen
3A4030C