Graco 25A693 Instructions Manual page 63

Setup Prerequisites Prerequisites
Setup Setup Prerequisites
Before beginning these setup procedures, all paint
kitchen components must meet these conditions:
• All components must be installed, both in the
non-hazardous location and in the hazardous
location.
• Communication must be established between
components.
• Software must be installed in the control modules.
• You must know and understand how each station
is configured and exactly what components are
installed in each station.
3A4030C
Using the Setup Screens
Create the the Stations Stations
Create Create the Stations
Begin the setup process by entering the number of
stations in the system.
The system creates each station and assigns a
number (1–20) that corresponds to each station.
1. Press on any Run screen to enter the Setup
Menu screen.
The Number Number of of of Stations Number Stations field indicates the Stations
number of stations that currently exist.
2. Press inside the
3. On the Number of Stations popup screen, use
the keypad to enter the number of stations in the
Intelligent Paint Kitchen installation (1–20), then
press the Return key
4. If stations are added later, repeat steps 1–3,
entering the total number of stations in the
system.
area of the screen.
.
63