Graco 25A693 Instructions Manual page 120

Operation
View System System and and Component
View View System and
The color of a component's icon (green, red, yellow,
no color) indicates its current status.
If the light tower kit is installed, the lights indicate the
system status as follows:
Color Meaning
Color Color Meaning Meaning
Green Operation is normal.
Yellow A deviation has occurred. The
system continues to run.
Red An alarm has occurred. System has
stopped.
No color The system is not operating.
Remote Operation Operation Using
Remote Remote Operation
Touchscreen Box Box
Touchscreen Touchscreen Box
The Touchscreen Box (J) allows users to view logs
and software screens from a remote device.
Setup Setup Setup
To remotely access the Touchscreen Box, configure
Port 1 and connect it to the facility network.
• To configure Port 1, see
Network Setup and Configuration, page
• Connect an Ethernet cable to Port 1 on
the bottom of the Touchscreen Box. See
the Touchscreen Connections section in
Touchscreen Box (J) 25A693, page
120
Component Status Status
Component Status
Using the the
Using the
92.
20.
Access Access Access
After an IP address is established and connected,
open a web browser. In the address bar, type the
IP address assigned to the Touchscreen Box. If
the connection is successful, the following screen
appears:
Figure 90 Removable Disk
Click View View View Logs Logs or Remote Logs Remote View Remote
information from the connected Intelligent Paint
Kitchen system.
• View View View Logs Logs: Use this function to access all log Logs
files on the unit in CSV format. Logs can only be
viewed; they cannot be downloaded. The following
data is available for stations 1–20:
– Pump Flow Rate: Recorded 5-second intervals
– Pump Cycle Per Minute: Recorded 5-second
intervals
– Pump Force: Recorded 5-second intervals
– Pump Pressure 1: Recorded 5-second intervals
– Pump Pressure 2: Recorded 5-second intervals
– Primary Agitator Frequency: Recorded 5-second
intervals
– Secondary Agitator Frequency: Recorded
5-second intervals
– Primary Tank Level: Recorded 60-second
intervals
– Secondary Tank Level: Recorded 60-second
intervals
• Remote Remote View Remote View: Use this function to navigate View
all screens on the Touchscreen interface.
You can only view current information on the
Touchscreen interface; you cannot control the
Intelligent Paint Kitchen system. For more
information, including screen graphics, see
Touchscreen Software, page
NOTE: Navigating on the web browser causes the
screens to change on the Touchscreen interface.
If others are accessing the Touchscreen interface,
they will see the remote navigation. Make sure the
remote and local operations do not conflict with
each other.
View to display View
57.
3A4030C