Graco 25A693 Instructions Manual page 115

Ref. Item
Ref. Ref. Item Item
13 Actual RPM
14 Set Point
15 Actual Level
16 Last Tank Level
17 On Time
18
Off Time
19 Load
20 Profiles
21 Profile Select
3A4030C
Description
Description Description
Current agitator blade speed.
• Direct Drive: 0-500 RPM
• Back Gear: 0-50 RPM
Set point for agitator:
• Percentage: 0 -100%
• Hertz:
– Direct Drive: 2-18 Hz
– Back Gear: 2-43 Hz
• RPM:
– Direct Drive: 55-500 RPM
– Back Gear: 2.4-50 RPM
Current tank level percentage.
Last tank level at which the agitator speed was updated when using
agitator profiles.
Current on time for the agitator in minutes when using agitator profiles.
Current off time for the agitator in minutes when using agitator profiles.
Current agitator load as a percentage of the drivers output current rating.
Each column (#1–#2) displays the settings of an agitator profile. When
one of these profiles is selected, the chosen column is highlighted in
green.
Press one of the following to choose the profile and set operation
parameters for the agitator:
Turn off the pump.
Turn off the pump.
Select Profile 1, if created.
Select Profile 2, if created.
Operation
115