Graco 25A693 Instructions Manual page 116

Operation
View View the View the Pumps the Pumps Pumps Screen Screen Screen
The Pumps screen displays component-level
information for the pump in each station. From this
screen, you can navigate directly to any Station
screen and you can view current operational data for
any selected pump in the system.
Figure 88 Pumps Screen
You can perform any of the following tasks from the Pumps screen:
Task Task Task
Enable a station
Disable a station
View the Station
Status screen for a
station
116
Action Action Action
Production column for the station, press Off
In the Production Production
turns green to indicate that the station is successfully enabled.
Production column for the station, press On
In the Production Production
turns blue to indicate that the station is disabled.
Press the Station Station button for the station. See Station
Press on any Run screen to display the
Pumps screen. Each row of controls represents one
station that has been created and configured through
the Intelligent Paint Kitchen software.
Off. The button changes to On
Off
On. The button changes to Off
On
Station Status Screen, page
On and
On
Off and
Off
104.
3A4030C