Advertisement
Installation
Optical unit
NCS2K-LC-LBK=
N C S 2 K - M F - M P O - 2 0 L C =
N C S 2 K - M F - 6 A D - C F S =
N C S 2 K - M F - 8 X 1 0 G - F O =
Installation
This section explains how to:
•
•
•
Unpack and Verify the Rack Mounting Bracket and Optical Modules
The rack mounting bracket and the optical modules are shipped in separate packages. This procedure describes
the steps for unpacking and verifying both the components.
Step 1
Unpack and inspect the rack mounting bracket and optical modules.
The rack mounting bracket package should include these components with the quantity of the item (specified
in parentheses), included in the package.
• 19-inch ANSI/IEC rack mounting bracket assembled with 3 filler panels
• Straight external brackets for 23-inch ANSI installation (2)
• Z-shaped external brackets for ETSI installation (2)
• #12-24 x 0.50 pan-head Phillips screws (4)
• #12 lock washers (4)
• M6 x12 pan-head Phillips screws (8)
• Lock washers for M6 screws (8)
• Velcro strips for fiber management (4)
Installing the Cisco NCS 2000 Series Passive Optical Modules
38
Description
UPC LC plug
dual connector
with internal
interconnection
between two
ports
20-LC fan-out
module
six port add/drop
module
fan-out module
Unpack and Verify the Rack Mounting Bracket and Optical Modules, on page 38
Install the Rack Mounting Bracket, on page 39
Install the Optical Module, on page 41
Installing the Cisco NCS 2000 Series Passive Optical Modules
Physical Dimensions (mm)
Height
Width
9.2
35
35
179
17
179
35
179
Weight (kg)
Depth
15
0.0047
215
0.659
165
0.7
165
1
Advertisement
