Table of Contents
Advertisement
3.3.4
Setting country code
The DocuPrint C2090FS Fax function requires telecommunication certification by countries. Before you using
DocuPrint C2090FS Fax function, you need configuring the fax setting for location of the certified countries
that offer fax as standard capability.
1.
In FAX Mode, press <Menu> on the control panel. Press <▼> to find [Configuration – Need
password?] screen then press <Set>
2.
On the password screen, press <0> four times, press <Set>.
3.
Press <▼> find out [Configuration – Network] screen.
4.
Press <◄/►> to go to [Maintenance – Country code] the press <Set>.
5.
Please refer to below table for your country code selection.
6.
Press <Set> to confirm your setting
1. Hong Kong
2. China
3. South Korea
4. Taiwan
3.3.5
Setting subnet mask/gateway address
1. When [IP Address] is displayed, press the <▲> or <▼> button to display [Subnet Mask], then
press the <►> or the <Set> button.
2. Press the <▲> <▼> <►> <◄> buttons to enter the subnet mask, then press the <Set> button.
3. Press <◄> button to return to [Subnet Mask].
4. Press the <▲> or <▼> button until [Gateway Address] is displayed, then press the <►> button.
5. Press the <▲> <▼> <►> <◄> buttons to enter the gateway address, then press the <Set>
button.
6. Switch off the printer and then switch it on again.
Note:
•
When "Ready to print" is displayed, follow steps 1 to 4 in the previous section before proceeding to the
next procedure.
3.4 Power save mode
This printer is equipped with a power saver mode to reduce power consumption when it is left idle.
All manuals and user guides at all-guides.com
Country Code
5. Singapore
6. Australia
7. New Zealand
8. Indonesia
- 24 -
9. Malaysia
10. Vietnam
11. Philippines
12. Thailand
Advertisement
Table of Contents
