Table of Contents
Advertisement
[EP Diag/Repair Request]
When the EP system via the Internet is used, the device contacts our Customer Support
Center if a check or maintenance is required.
Reference
For information on the EP system, refer to "EP System" (P.294).
[EP Registration]
Reference
For information on the EP system, refer to "EP System" (P.294).
[BB Registration]
Select [BB Registration] and then select [Start] to register the device in EP system.
[EPA Server Registration]
After the BB registration, [EPA Server Registration] is automatically selected in accordance
with your environment. When this feature is selected, enter the destination server IP of your
EPA server and then select [Start] to register the device in the EPA server.
[Quick Setup Home]
Allows you to check if the initial settings to use the device have completed. To set up the
items not set yet, you can open the setting page through this screen.
[Software Options]
This feature is for service representative use.
[Software Options - USB]
Installs the USB dongle to make the optional features available.
[Software Update]
When the EP system is used, this feature is used to upgrade the software for the EP system
when the version upgrade is required. The upgrade can be conducted immediately, or on
the specified date and time.
Important
After the downloading is finished, the device automatically restarts and upgrades the software. After the
device restarts again and the Home screen is displayed, the software upgrade is completed. Do not turn the
power off during upgrade. The device may not start due to incomplete installation.
Note
To use this feature, a dedicated contract is needed in addition to a use of the EP system service. For more
information, contact our Customer Support Center.
The EP system may not be able to be used in some areas. For application, contact our Customer Support
Center.
Reference
For information on the EP system, refer to "EP System" (P.294).
[Maintenance]
111
Advertisement
Table of Contents
