Paper Control - Tally T5023+ Programming Manual

Vertical print control

Paper control

ESC
27
1B
Parameter:
n=0 Deactivates the mode
n=1 Selects the feeder compartment 1
n=2 Selects the feeder compartment 1
n=4 Selects the feeder compartment 1
n=R Ejection
This command is only to be used if a single sheet feeder is installed. If
i
the feeder is activated and no document has be fed by the operator, a
document will be fed from the paper supply automatically when a print
or line feed command is received.
74
EM n
25 n
19 n
T5023/5023+ - Programming Guide
ASCII character
Decimal
Hexadecimal
Standard commands