Electronic Journal Functions; Change Between Document And Journal Printing - Tally T5023+ Programming Manual

Additional commands (Printer)

Electronic Journal Functions

Change between Document and Journal Printing

CSI
ESC [
27
91
1B
5B
Parameter:
n = 0 Document print (Default)
n = 1 Electronic journal memory
The parameter 'Journal memory' is used to redirect all following print characters
to a resident memory. All control sequences are ignored, except for line feeds.
This command initializes the printout of all characters still located in the internal
print buffer.
Command sequences which are written into the journal memory have no influ-
ence to the printout off the document station:
This function is available only in the device variant with 'memory extension'. The
selection Memory Extension -> EL-Journal must be enabled from the Service
menu. If the selection is not enabled, the command will be ignored
.
When the electronic journal memory is enabled, only the net data (prin-
i
table characters) is stored. Any attributes, tabs, character set com-
mands are filtered from the data stream. Graphic data is not supported.
In this mode, the responses are extended.
n ! q
n ! q
n 33 113
n 21 98
T5023/5023+ - Programming Guide
Electronic Journal Functions
Name
ASCII character
Decimal
Hexadecimal
235