Setting Control Point Ii - Tally T5023+ Programming Manual

Status and error messages

Setting control point II

Command:
CSI
ESC [
27
91
1B
5B
Response (control point):
CSI
ESC [
27
91
1B
5B
Parameter:
n = value freely definable by the application in the range 0 to 9999.
Function:
The command CSI n ) t triggers the release of an acknowledgement signal to
the processor interface if the last mechanical procedure was started in the prin-
ting unit and no error has occurred at this point in time.
For a definite assigning of the acknowledgement signals (also CSI n ) t) to the
transferred requests, the acknowledgement message contains the same para-
meter value n that the application transferred in the request.
228
n )
n )
n 41 116
n 29 74
n )
n )
n 41 116
n 29 74
T5023/5023+ - Programming Guide
Additional commands (Printer)
t Name
t ASCII character
Decimal
Hexadecimal
t Name
t ASCII character
Decimal
Hexadecimal