Special Character Codes; Carriage Return - Tally T5023+ Programming Manual

Standard commands

Special character codes

In this chapter the following commands are described:
Command
CR
BS
DEL
CAN

Carriage return

CR
13
0D
Function:
After CR (carriage return) the data contained in the buffer is printed and the print
head is returned logically to the left edge.
If CR, according to the setting, for example, on the operating panel, is only inter-
preted as CR, the print head is returned on the same line. If necessary, an addi-
tional line feed must be achieved by subsequently pressing LF (line feed, see
section "Line feed commands" in this chapter).
If CR, according to presetting, is interpreted as CR + LF, a line feed is added
after execution of the carriage return.
Example:
A demonstration of the effect of CR commands depending on preset printer parame-
.
ters
BEGIN
PRINT("Test line", char(13))
PRINT("Test line", char(13))
PRINT("Test line", char(13))
END
Function
Carriage Return
Backspace of one character
Deleting a character
Canceling a line
ASCII character
Decimal
Hexadecimal
T5023/5023+ - Programming Guide
Special character codes
J
J
51