Controlling the MSR / MICR functions
After the execution of the command a acknowledgement CSI n1; n2 # r is produced,
which can be evaluated in the
ber of writing attempts and a message if an error has occured during control rea-
ding.
–
In the MSR unit of the document printer, the characters are limited
i
to the range from 30h-3Fh. Characters outside this range lead to an
error in the printer control.
–
The command triggers the output of characters still in the print buf-
fer to the document printing point.
216
program. The acknowledgement contains the num-
T5023/5023+ - Programming Guide
Additional commands (Printer)