Selecting A National Character Set - Tally T5023+ Programming Manual

Switching on italic print

Selecting a national character set

ESC
27
1B
Function:
Altogether twelve character codes of the basic character set (hex 23, 24, 40, 5B-
60 and 7B- 7E) can be occupied with national special characters using the com-
mand ESC R (n). By means of a value between 0 and 12 for n, one of thirteen
possible country versions is selected according to the following list:
n = 0 : USA
n = 1 : France
n = 2 : Germany
n = 3 : Great Britain
n = 4 : Denmark
n = 5 : Sweden
n = 6 : Italy
n = 7 : Spain 1
n = 8 : Japan
n = 9 : Norway
n = 10 : Denmark
n = 11 : Spain 2
n = 12 : Latin America
– A summary of all the country- specific characters and their encryp-
i
tion (hexadecimal, decimal) is contained in the introductory section
"Character set selection" in this chapter.
– The country versions of the ISO 8859 character set also are selec-
ted via the command ESC R (n) (see "Selection of type fonts/ cha-
racter sets" in the chapter "Additional commands").
150
R (n)
82 n
52 n
T5023/5023+ - Programming Guide
Character set commands
ASCII character
Decimal
Hexadecimal