Tally T5023+ Programming Manual page 103

Standard commands
Width and height of character (example 'H' character):
font
LQ-Sans Serif
LQ-Roman
DQ
With proportional spacing the different widths of the individual characters are ta-
ken into consideration, for example, the character 'i' is narrower than the charac-
ter 'w', i. e. the print width of the character 'i' in proportional spacing is smaller
than that of the character 'w'. Irregular spaces between the individual characters
of a word are thus removed. The character width in proportional spacing varies
between 1.0 and 2.6 mm. The size of the characters is 10 cpi. The print quality
is switched to LQ.
10 cpi
width/
height
2.0/2.6 mm 1.7/2.6 mm
2.3/2.5 mm 2.0/2.5 mm
1.8/2.5 mm 1.6/2.5 mm
T5023/5023+ - Programming Guide
Print quality and character size
12 cpi 15 cpi
width/ width/
height height
1.4/1.9 mm
1.5/1.8 mm
1.4/1.9 mm
proportio-
nal
width/
height
1.9/2.6 mm
2.1/2.5 mm
93