Status And Error Messages - Tally T5023+ Programming Manual

Additional commands (Printer)

Status and error messages

The CSI sequences described in the following section are either issued by the
program and acknowledged with appropriate responses or, depending on the
processing situation, are automatically generated by the document printer and
transmitted to the processor:
Command
ESC [ n ! t
ESC [ n ) t
ESC [ n ! z
ESC [ " z
ESC [ n;m " z
ESC [ n # z
ESC [ n1;...;n8 # z
The internal message buffer of the document printer is limited to ap-
i
prox. 30 status messages. When this buffer is full, messages subse-
quently generated are ignored (cleared). For this reason, care must be
taken in the application program that the messages are loaded and
evaluated at appropriate intervals.
Function
Initiating the control cycle
Setting control point
Global printer status
Requesting special printer
messages
Special printer messages
Requesting printing unit
parameters
Printing unit parameters
T5023/5023+ - Programming Guide
Status and error messages
Initiator
Program
II Program
Document printer
Program
Document printer
Program
Document printer
223