Controlling the configuration of the printer
Initializing the printer
ESC
27
1B
Function:
Via ESC @ the printer can be reset by the program to certain operating conditi-
ons (initializing of software). ESC @ resets the printer to the default values and
deletes all the print data of the current line out of the print buffer, which were
transmitted prior to the command.
The following actions will be executed:
–
set line spacing to 6 lines per inch
–
set the document format and the right and bottom margins to the default va-
lues (the current vertical position is defined as the new line 1)
–
set the left margin to the value which has been set in the emulation menu
(adjustable via the operating panel)
–
set the character spacingto the value which has been set in the emulation
menu (adjustable via the operating panel)
–
set the print quality and type font to the value which has been set in the emu-
lation menu (adjustable via the operating panel)
–
delete vertical tabs and select channel 0
–
switch off elongated, bold, double impact and italic print
–
delete MSB specification
–
set additional character spacing to 0
–
delete superscript or subscript
–
switch off underlining
–
adjust printing flush lef
42
@
64
40
t.
T5023/5023+ - Programming Guide
ASCII character
Decimal
Hexadecimal
Standard commands