Character set commands
Switching on/off the character set defined by the user
ESC
27
1B
Function:
Using ESC % (n) the character set defined by the user is switched on. Charac-
ters defined by the user will only be printed if the currently selected print quality
(draft or LQ) and the current print mode (proportional or superscript/ subscript)
correspond to the character definition.
n = 0: user-defined character set off
n = 1: user-defined character set on
The sections "Character set selection" and "Character definition" con-
i
tain further notes and program examples for the command ESC % (n).
%
(n)
37
n
25
n
T5023/5023+ - Programming Guide
Switching on italic print
ASCII character
Decimal
Hexadecimal
151