Sheet Ejection Commands - Tally T5023+ Programming Manual

Sheet ejection commands

Sheet ejection commands
The length of a document can be set directly or indirectly and the document ejec-
ted using the following commands:
Command
FF
ESC C (n)
ESC C NUL (n)
Using ESC C (n) or ESC C NUL (n) the document length depending on
i
the size of the document to be processed is set for the document.
On the basis of the document length thus set, the bottom margin (see
ESC N (n)) can be set and the actual area to be printed on a document
can be determined.
64
Function
Sheet ejection
Determining the document length in lines
Determining the document length in inches
T5023/5023+ - Programming Guide
Standard commands