Program Steps (Annotated) - Tally T5023+ Programming Manual

Document processing

Program steps (annotated)

1. Setting absolute vertical position referring to the bottom document edge
Command:
Parameter:
Remarks:
2a. Requesting document width (optional)
Command:
Remarks:
2b. Positioning on the coding line if document width measurement was
used (optional).
Command:
Parameter:
Remarks:
258
CSI n " p
n = 90
The distance bottom edge of document/
bottom edge of OCR line = 90/180 inch
= 12.7 mm was selected in order to have a
sufficient distance to a possibly present
black bar. If such black bars are not there,
you can begin directly with step 2b (see also
the command description CSI " t,
'Requesting the document width', in the
"Additional commands"
CSI " t
The document width can be used as a
differentiation feature to branch to different
document-dependent application programs.
CSI " t initiates a document request if a
document is not yet present or inserted. The
document request is indicated by the
flashing 'DOCUMENT' LED on the operating
panel.
CSI n " p
n = 60
Distance bottom edge of document/bottom
edge of OCR line = 60/180 inch = 8.47 mm
T5023/5023+ - Programming Guide
Application examples
chapter).