Escape Sequences (Bootstrap Loader); Switch-Over To The Load Function - Tally T5023+ Programming Manual

Loadable Firmware/Character Generators

ESCAPE Sequences (Bootstrap Loader)

Switch-over to the Load Function

ESC
27
1B
Function:
This command is used to exit the currently running emulation software. All data
is deleted from the input buffer. The mechanical functions are stopped
immediately.
The load software is started and generates the acknowledgment ESC BEL L
after 500ms min. for synchronization.
Parameters
n = 0 Transfer rate not changed
n = 1 Baud rate 2,400
n = 2 Baud rate 4,800
n = 3 Baud rate 9,600
n = 4 Baud rate 19,200
n = 5 Baud rate 38,400
n = 6 Baud rate 57,600
n = 7 Baud rate 115,200
BEL L
7 76
07 4C
T5023/5023+ - Programming Guide
ESCAPE Sequences (Bootstrap
n ASCII characters
48-55 Decimal
30-37 Hexadecimal
279