Non- Executable Commands; Signal Tone - Tally T5023+ Programming Manual

Non- executable commands

Non- executable commands
This section describes the commands which cannot be executed by the docu-
ment printer because of specific requirements. Such commands are ignored,
therefore they do not cause an error.
Command
BEL
ESC s (n)
ESC r (n)

Signal tone

BEL
7
07
Function:
BEL normally activates the acoustic signal of a printer. The document printer
has no bleeper.
120
Function
Signal tone
Switching half- rate printing on/ off
Selecting the print colour
ASCII character
Decimal
Hexadecimal
T5023/5023+ - Programming Guide
Standard commands