Line Feed Commands - Tally T5023+ Programming Manual

Standard commands

Line feed commands

The standard line spacing amounts to six lines per inch, i. e. the line spacing is
1/ 6 inch.
The line spacing can be changed using the following commands, whereby the smal-
lest unit for the line spacing is 1/ 180 inch. The corresponding line feed is carried out
depending on the set line spacing:
Command
LF
ESC J (n)
ESC 0
ESC 2
ESC 3 (n)
ESC A (n)
ESC + (n)
Function
Line feed
Carrying out an n/180 inch line feed
Determining 1/8 inch line spacing
Determining 1/6 inch line spacing
Determining 1/180 inch line spacing
Determining 1/60 inch line spacing
Determining 1/360 inch line spacing
T5023/5023+ - Programming Guide
Line feed commands
J
J
J
J
J
J
55