Character Set Commands - Tally T5023+ Programming Manual

Character set commands

With the help of the following control commands, it is possible to change bet-
ween the different character sets of the printer. Furthermore, your own charac-
ters can be defined as dot patterns and stored in the memory of the printer.
Command
ESC % (n)
ESC & (n) (n) (m)
ESC 4
ESC 5
ESC 6
ESC 7
ESC : NUL (n) NUL
ESC R (n)
ESC t (n)
By means of CSI sequences, further character sets with specially defi-
i
ned font qualities can be selected (see the additional command
CSI n # q in the "Additional commands" chapter). Character fonts sel-
ected in this way are treated as normal LQ type fonts, that is to say, all
standard commands (print quality, character size, types of print) also
work on these character sets in the way described in the "Standard
commands" chapter.
General notes on the command description can be found in the "Stan-
dard commands" chapter in the sections "Description components",
"Coding of decimal command parameters" and "Program examples".
Function
Switching on/ off the character set defined by
the user
Transferring the character definition
Switching on italic print
Switching off italic print
Switching on extended character set
Switching off extended character set
Copying the character set into the RAM
Selecting the national character set
Selecting the character set
T5023/5023+ - Programming Guide
123