Selecting The Character Size 10 Cpi (Pica) - Tally T5023+ Programming Manual

Print quality and character size

Selecting the character size 10 cpi (Pica)

ESC
27
1B
Function:
ESC P sets the character size to 10 cpi (10 characters per inch). This character
size is also set after switching on or initializing the printer if it has been selected
in the emulation menu.
– The character size 10 cpi can be combined with condensed and
i
elongated print.
– The command ESC P is normally used to deactivate the 12 cpi or
15 cpi character size.
Example:
BEGIN
PRINT(char(27),"P")
PRINTLF("character size 10 cpi")
PRINT(char(27),"M")
PRINTLF("character size 12 cpi")
PRINT(char(27),"g")
PRINTLF("character size 15 cpi"))
END
Result:
98
P
80
50
T5023/5023+ - Programming Guide
ASCII character
Decimal
Hexadecimal
Standard commands