Loading The Character Generator - Tally T5023+ Programming Manual

Loadable Firmware/Character Generators

Loading the Character Generator

$ M
36 77
24 4D
Function:
$MOD$ is a part of the file and may not be transferred again before the data.
Data is transferred after the character sequence $MOD$. It is not allowed to load
other data than data with the file extension .FNT. A checksum is placed at the
end of the file. After the load process this checksum can be used to verify that
the load process was successful.
If the data was transferred without errors, the relevant data ID is provided in the
ESC I D acknowledgment.
O D
79 68 36
4F 44 24
T5023/5023+ - Programming Guide
Loading character generators
$ ASCII chars
Decimal
Hexadecimal
285