Graphics commands
The instruction set of the document printer contains commands for printing gra-
phics, for example, drawings, diagrams or pictures.
There are two different approaches to printing graphics:
–
Graphics printing in text mode
The graphics are composed from individual graphics characters (upper cha-
racter table) (see chapter "Character set commands").
–
Graphics printing in graphics mode (dot graphics)
The graphics are printed as dot graphics. In other words, the individual pi-
xels, from which the graphics are composed, are transferred to the printer
encrypted as number sequences. With a maximum density of 180 x 360 dots
per inch, the printing of more complicated pictures is also possible.
This chapter describes the commands for printing in graphics mode:
Command
ESC * (s) (n) (m) data
ESC K (n) (m) data
ESC L (n) (m) data
ESC Y (n) (m) data
ESC Z (n) (m) data
ESC ? (m) (s)
Function
Selecting graphics mode
Switching on graphics mode 'single density'
Switching on graphics mode 'double density'
Switching on graphics mode 'double density
and double rate'
Switching on graphics mode 'quadruple
density'
Reassign graphics commands
T5023/5023+ - Programming Guide
157