Tally T5023+ Programming Manual page 14

Contents of the manual
Chapter "Additional commands"
This chapter explains special control commands for document processing or for
processing ZeKoSa data. An important application area for the commands des-
cribed here is the processing of passbooks. This also contains important infor-
mation on processing documents using horizontal and vertical print positioning.
Chapter "Application examples"
A small program example of command functions normally belongs to the com-
mand descriptions in the chapters "Standard commands", "Character set com-
mands", etc.
The chapter "Application examples" uses more complex operations to explain
the use of specific commands in connection with:
– Text processing with the document printer
– Passbook processing with MSR.
Individual program steps are annotated in detail and the program structure is
presented in the form of a pseudo code.
Chapter "Loadable Firmware/Character Generators"
Firmware and character generators of the document printer are stored in a pro-
grammable memory with FLASH technology. The chapter "Loadable Firmware/
Character Generators" describes the sequence of load processes and the
bootstrap loader ESC sequences.
Chapter "Controlling Asian Character Sets"
Asian character sets must be made available for the specified printers to prepare
the document printer for its usage in the Asian area. This chapter provides a de-
scription of the control of the Asian character sets.
Chapter "Specific Operating System Dependencies"
This chapter describes specific operating system dependecies.
Chapter "Glossary"
Special terms are explained in this chapter.
4
T5023/5023+ - Programming Guide
Preface