Program Steps (Annotated) - Tally T5023+ Programming Manual

Application examples

Program steps (annotated)

1. Switching on LQ mode
Command:
Parameter:
2. Switching on proportional spacing
Command:
Parameter:
Remarks:
3. Setting line spacing
Command:
Remarks:
4. Determining the document length
Command:
Parameter:
Remarks:
5. Determining the left margin
Command:
Parameter:
ESC x (n)
n = 1 (LQ mode)
ESC p (n)
n = 1 (proportional spacing on)
With proportional spacing setting the charac-
ter width is unnecessary.
ESC 2 (1/6 inch)
This command is not actually necessary for
the example as 1/6 inch line spacing is the de-
fault value.
ESC C (n)
n = 72 (number of lines)
With line spacing of 1/6 inch and 72 lines, a
document length of 12 inches results. This
corresponds to the default value of the docu-
ment printer. Therefore
also be omitted.
ESC l (n)
n = 12 (position 12 with 10 cpi, default = 0)
T5023/5023+ - Programming Guide
Processing of a blank form
this program step could
243