Switching Print Quality (Draft/ Lq) - Tally T5023+ Programming Manual

Print quality and character size

Switching print quality (Draft/ LQ)

ESC
27
1B
Function:
– Switching to draft print quality
ESC x (0) switches from LQ to draft print quality. This results in a higher print
rate and a lower print density (60 print dots per inch in a horizontal direction).
– Switching to LQ print quality
ESC x (1) switches from draft to LQ print quality. This results in a lower print
rate and a higher print density (180 print dots per inch in a horizontal direc-
tion).
– Switching from draft to LQ is also possible within a print line.
i
– After switching to LQ print quality, printing takes place in the last
print type selected using ESC k (n).
– After switching on or initializing (ESC @) the printer prints in the
print quality which has been set in the emulation menu.
– When switching on the proportional spacing, the print quality is au-
tomatically set to LQ.
94
x (n)
120 n
78 n
T5023/5023+ - Programming Guide
ASCII character
Decimal
Hexadecimal
Standard commands