Line feed commands
Line feed
LF
10
0A
Function:
On receipt of the command LF (line feed) the data contained in the buffer is printed
and the paper transported one line further according to the current line spacing
–
If after LF the logical bottom edge of the sheet is exceeded (depen-
i
ding on the set document format), the document is ejected.
–
If a bottom margin set using ESC N (n) is exceeded, the document
is also ejected.
–
The horizontal position is
56
ASCII character
Decimal
Hexadecimal
set back to the left margin (CR).
T5023/5023+ - Programming Guide
Standard commands
.