Tally T5023+ Programming Manual page 254

Processing of a blank form
6. Determining the right margin
Command:
Parameter:
Remarks:
7. Determining the vertical tabs
Command:
Parameters:
Remarks:
8. Deleting the default values for horizontal tabs
Command:
Remarks:
9. Setting the horizontal tabs
Command:
Parameters:
Remarks:
244
ESC Q (n)
n = 72 (position 72 with 10 cpi)
The default value is 90. With a setting 'right
margin = position 72' printing is possible up to
position 71.
ESC B (n1,n2,n3,n4, n5) NUL
n1 = 8 (first print line)
n2 = 16 (reference line)
n3 = 20 (start of text)
n4 = 42 (greetings line)
n5 = 46 (name of sender)
Here the vertical tabs in a line spacing of 1/6
inch are automatically determined in channel
0. For channel 1 to channel 7 the command
ESC c (n1,...)
.
number)
ESC D NUL
After switching on or initializing the printer
(ESC @)
characters.
ESC D (n1,n2) NUL
n1 = 35 (position of processor abbreviation)
n2 = 40 (position of date)
In proportional printing the characters are set
in pica spacing (10 cpi).
T5023/5023+ - Programming Guide
Application examples
NUL must be used (c = channel
tabs are set at a spacing of eight (8)