Tally T5023+ Programming Manual page 202

Basic commands for document processing Additional commands (Printer)
– The character fonts for the document printer have the following standard op-
tions:
DQ area =
LQ area =
– The fonts DQ, Roman and Sans Serif can be selected using the standard
commands 'Switch over print quality' (ESC x (n)) and 'Select LQ type font'
(ESC k (n)). In contrast, the fonts OCR A, OCR B and ISO 8859 can only be
selected by means of the additional command 'Selection of type fonts/cha-
racter sets' (CSI n # q). The following table contains the necessary character
set and font numbers:
Font
OCR-A
OCR-B
Roman ISO 8859
Sans-Serif ISO 8859
DQ ISO 8859
Country versions for the ISO 8859 character set are selected using the com-
mand 'Select national character set' (ESC R (n)):
Font
ISO 8859-2 East Europa
ISO 8859-5 Cyrillic
ISO 8859-7 Greece
ISO 8859-8 Hebrew
ISO 8859-9 Turkey
ISO 8859-15 Euro
The character tables for OCR- A, OCR- B and ISO 8859 are listed in the appen-
dix "Character set tables".
192
DQ
1. Roman
2. Sans- Serif
3. OCR-A (OCR-A1 Eurobanking)
4. OCR-B (OCR-B1 Eurobanking)
Font number
n = 900
n = 901
n = 600 (only with font CP15_437)
n = 601 (only with font CP15_437)
n = 602 (only with font CP15_437)
Country-specific character sets
n = 0
n = 1
n = 2
n = 3
n = 4
n = 5
T5023/5023+ - Programming Guide