Product Characteristics - UTStarcom iSpirit 3026 Manual

1.2 Product Characteristics

1.2.1 Technology Features
10/100Mbps ports which are self negotiable with either direct-connect cables or
cross-over cables;
10/100Mbps ports which are self negotiable and can be either in full-duplex mode or in
half-duplex mode;
Modules supported: 100M single-mode or multi-mode fiber modules ， 1000M
single-mode or multi-mode fiber modules and 10/100/1000Base-T copper modules;
Supporting super-long cable, with a maximum CAT5 cable length of 140 meters;
Auto source address learning;
8K ARL table;
Providing flow control, and supporting IEEEE802.3X Head Of Line block and
backpressure；
Providing 4 priority queues and 802.1p priority match, thus providing flexible priority
control at port level for multimedia and other kinds of data transmission;
Supporting port binding with network adaptors, thus providing safe access;
Supporting port trunking, with a maximum of 6 groups, each of which supports a
maximum of 8 ports of same speed;
VLAN support: both port-based VLAN and 802.1Q tagged VLAN, with a maximum
configuration of 256 VLANs;
Supporting STP protocol;
Supporting MIB II and RMON, which has 4 different styles (Stastistics, History, Alarm
and Event);
LED status indicator lights with 4 modes
Static routing function
Supporting IGMP snooping
Supporting Xmodem software upgrading
Supporting 802.1x authentication protocol
1.2.2 Application Features
1. 100M and 1000M combination technology
The iSpirit 3026 switch supports fast Ethernet and 1000M Ethernet link aggregation, which