UTStarcom iSpirit 3026 Manual page 47

To monitor data from/to user 1
Switch# mirror
Mirror port: 3
Egress ports_list: 1
Ingress ports_list: 1
To monitor data from/to user 2
Switch mirror
Mirror port: 3
Egress ports_list: 2
Ingress ports_list: 2
Notes:
Don't mess up mirror port and mirrored ports. Mirror port is the port that's used to monitor data
packets; Mirrored ports are the ports that are being monitored and whose packets are going to
be captured, they include egress ports and ingress ports.
To show mirror configuration
Switch# show mirror
Mirror mode: L2
Mirror port: 3
Egress ports_list: 2
Ingress ports_list: 2
2.Trunk (Figure 2-2)
Figure 2-2.Trunk configare