UTStarcom iSpirit 3026 Manual page 200

contains three parts: VID, multi-MAC address and port list. VID and multi-broadcast MAC is the
index of entry.
A port might be a member of multi-broadcast group, and it might not be. The meaning of
characters on the port of page is shown in Table 18-5:
Table 18-5
Character
-
M
Fig 18-20 Page Of Current Multi-Broadcast Group Configuration
(2) Static multi-broadcast group configuration page
Fig 18-21 display the static multi-broadcast group configuration page which allows the user to
set up one multi-broadcast group configuration page and install many ports for the
multi-broadcast group. The page consists of two parts: active line and list box, both of which can
be complied; the list box under the active line contain a series of static multi-broadcast group
with identifier of VID and MAC address
To configure a new multi-broadcast group, user should input VID, multi-broadcast MAC address
and data of port list, then press Apply or Save Key, and the VID and MAC address of
Full name
Non-member The port is not the member of this
Member The port is the member of this
Meaning