Table of Contents
Advertisement
1000M
multiple mode
It's shown in Figure1-3 how to insert a module to the extendible slot. Steps:
(1) insert the module into the slot along the track;
(2) make sure that the module fully inosculates with the slot;
(3) screw tightly;
Steps for removing a module is as follows:
(1) unscrew, both for the left side and the right side, to let the module deviate from the
panel;
(2) grasp tightly the screws on the left and the right, pull the module out in equilibrium and
make it separate from the box.
Notes:
Extendible modules don't support hot-plug, so you must turn the power off before plugging or
unplugging, otherwise the switch may be damaged.
1.5.3 10/100/1000Base-T ports
10/100/1000Base-T ports can connect as long as 140 meters. Devices it can connect include:
10Base-T compatible devices, such as work stations and concentrators connected
through RJ-45 interfaces using CAT3, CAT4, CAT5 or CAT5E cord;
100Base-TX compatible devices, such as those connected through RJ-45 interfaces
using CAT5 or CAT5E cord, including high-speed work stations, servers, routers,
10um single mode
62.5um multiple mode
50um multiple mode
Figure1-3.how to insert a module to the extendible slot
850nm
10000m
220m
500m
Advertisement
Table of Contents
