UTStarcom iSpirit 3026 Manual page 36

Figure1-2.TFTP Server program
Then, set the path: Just click on the [Settings] button, a TFTPD32 configuration form will be
shown as in Figure1-3.
Figure1-3.TFTP Server program configuration
In the "Base Directory" bar type the path, then click on [OK] button to confirm;
Step 2: save the configuration to file at the switch
Under any CLI mode, just type the "save" command to save the configuration file.
Step 3: backup the file to the PC
Switch# upload configuration 192.168.0.2 backup