UTStarcom iSpirit 3026 Manual page 171

valve value in alarm group is used for defining network performance. Warning will be
generated if valve value is exceeded in some field.
Alarm group consists of a table alarmtable. Every item in table has been specified with
special variable need to be monitored, sampling interval and valve value parameter.
●
rmon event [index] mode：CONFIGURATION parameter： index： index，Index is
anoption, if there is input system default to generate an index value. Function: event group
supprts event definition. Event is generated by other conditions of MIB. Event can also
cause record information in this group, or give SNMP Trap message. rmon event command
is an Internation command, if the index is input appointed group is added or modified.
EventType in event Internation input field is introduced as follows: event type, none(1),
log(2), snmp-trap(3), and log-and-trap(4).
●
no rmon alarm <index>
Mode：CONFIGURATION
Parameter：
index：
Function：delete Alarm Configuration Entry of appointed index
●
no rmon event <index>
Mode：CONFIGURATION
Parameter：
index：
Function：delete Event Configuration Entry of appointed index
●
no rmon statistics <index>
Mode：CONFIGURATION
Parameter：
index：
Function：delete Statistics Configuration Entry of appointed index
●
show rmon configuration alarm [index]
Mode：CONFIGURATION
Parameter：
index：
Function：show configuration table of alarm, appointed index configuration will be shown if
input index, otherwise all configurations will be shown.
● show rmon configuration even [index] mode：CONFIGURATION parameter： index ：