Table of Contents
Advertisement
Figure1-4.Set up the net work connection
Step 2: connect the console port of the switch with a PC or terminal;
Step 3: install TFTP server on the PC (where the image file is saved);
Step 4: Copy the new image file to a directory on the PC, here suppose it's C:\t;
Step 5: Configure an IP address of the PC, suppose it's 192.168.0.2;
Step 6: Configure an IP address of the switch, suppose it's `92.`68.0;
Notes:
PC IP address and switch IP address should belong to the same IP subnet.
(2) Start TFTP server.
Step 1: start TFTP Server program. The interface is shown in Figure1-5.
Figure1-5.TFTP Server program
Advertisement
Table of Contents
